Panasonic TX-40C200E Operating Instructions Manual

Panasonic TX-40C200E Operating Instructions Manual Manual pdf 6 page image

English - 6 -Environmental InformationThis television is designed to be environment friendly.To reduce energy consumption, you can follow thesesteps:If you set the Power Save Mode to Eco, the TV willswitch to energy-saving mode. The Power SaveMode settings can be found in the ‘Picture’ sectionof the Main Menu. Note that some picture settings willbe unavailable to be changed.If pressed Right button while Eco option is selectedor Left button while Disabled option is selected,“Screen will be off in 15 seconds.” message will bedisplayed on the screen. Select Proceed and pressOK to turn the screen off immediately. If you don’tpress any button, the screen will be off in 15 seconds.Press any button on the remote or on the TV to turnthe screen on again.Note: If the Mode in the Picture menu is set to Dynamic,Power Save Mode will be set as Disabled and can not bechanged.When the TV is not in use, please switch off ordisconnect the TV from the mains plug. This will alsoreduce energy consumption.Standby Notifications1. If the TV does not receive any input signal (e.g.from an aerial or HDMI source) for 5 minutes, itwill go into standby. When you next switch-on,the following message will be displayed: “TVswitched to stand-by mode automaticallybecause there was no signal for a long time.”Press OK to continue.2. If the TV is on and it isn’t being operated for a whileit will go into standby. When you next switch-on,the following message will be displayed. “TVswitched to stand-by mode automaticallybecause no operation was made for a longtime.” Press OK to continue.Features• Remote controlled colour TV• Fully integrated digital terrestrial/cable TV (DVB-T/C)• HDMI input to connect other devices with HDMIsocket• USB input• OSD menu system• Scart socket for external devices (such as DVDPlayers, PVR, video games, etc.)• Stereo sound system• Teletext• Headphone connection• Automatic programming system• Manual tuning• Automatic power down after up to six hours.• Sleep timer• Child lock• Automatic sound mute when no transmission.• NTSC playback• AVL (Automatic Volume Limiting)• PLL (Frequency Search)• PC input• Game Mode (Optional)Accessories Included• Remote Control• Batteries: 2 x AAA• Instruction Book• Detachable stand• Stand mounting screws (M4 x 12)TV Control Buttons & Operation1. Up direction2. Down direction3. Programme/Volume / AV / Standby-On selectionswitchThe Control button allows you to control the Volume/Programme/ Source and Standby-On functions ofthe TV.To change volume: Increase the volume by pushingthe button up. Decrease the volume by pushing thebutton down.To change channel: Press the middle of the button,the channel information banner will appear on screen.Scroll through the stored channels by pushing thebutton up or down.To change source: Press the middle of the buttontwice, the source list will appear on screen. Scrollthrough the available sources by pushing the buttonup or down.To turn the TV off: Press the middle of the buttondown and hold it down for a few seconds, the TV willturn into standby mode.