Panasonic TX-40C200E Operating Instructions Manual

Panasonic TX-40C200E Operating Instructions Manual Manual pdf 13 page image

English - 13 -TV Menu ContentsPicture Menu ContentsMode You can change the picture mode to suit your preference or requirements. Picture modecan be set to one of these options: Cinema, Game, Dynamic and Natural.Contrast Adjusts the light and dark values on the screen.Brightness Adjusts the brightness values on the screen.Sharpness Sets the sharpness value for the objects displayed on the screen.Colour Sets the colour value, adjusting the colors.Power Save Mode For setting the Power Save Mode to Eco, Picture Off or Disabled.(When the Mode is Dynamic, Power Save Mode is automatically set as Disabled.)Backlight (Optional)This setting controls the backlight level. The backlight function will be inactive if thePower Save Mode is set to Eco. The backlight cannot be activated in VGA, MediaPlayer Mode or while the picture mode is set to Game.Noise Reduction If the broadcast signal is weak and the picture is noisy, use the Noise Reductionsetting to reduce the amount of noise.Advanced SettingsDynamic Contrast You can change the dynamic contrast ratio to desired value.Colour Temp Sets the desired colour tone.Picture ZoomSets the desired picture size from Picture Zoom menu.Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltageswitching.Film Mode Films are recorded at a different number of frames per second to normal television programmes.Turn this feature on when you are watching films to see the fast motion scenes clearly.Skin Tone Skin tone can be changed between -5 and 5.Colour Shift Adjust the desired colour tone.RGB Gain You can configure the colour temperature values using the RGB Gain feature.HDMI True Black While watching from a HDMI source, this feature will be visible in the Picture Settings menu.You can use this feature to enhance blackness in the picture.PC Position Appears only when the input source is set to VGA/PC.Autoposition Automatically optimizes the display. Press OK to optimize.H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.V Position This item shifts the image vertically towards the top or bottom of the screen.Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dotintensive presentations like spreadsheets or paragraphs or text in smaller fonts.Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture on thescreen. You can use phase to get a clearer picture by trial and error.Reset Resets the picture settings to factory default settings (except Game Mode).While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the PictureSettings while in PC mode.