Panasonic TX-40C200E Operating Instructions Manual

Panasonic TX-40C200E Operating Instructions Manual Manual pdf 5 page image

English - 5 -Mains plugWipe the mains plug with a dry cloth at regularintervals.Moisture and dust may cause fire or electrical shock.Assembling / Removing the pedestalPreparationsTake out the pieces of the pedestals and the TV fromthe packing case and put the TV onto a work tablewith the screen panel down on the clean and softcloth (blanket, etc.)• Use a flat and firm table bigger than the TV.• Do not hold the screen panel part.• Make sure not to scratch or break the TV.Assembling the pedestal1. Screw the pieces of the pedestals together andmount the rubber buffers.2. Place the stand(s) on the stand mountingpattern(s) on the rear side of the TV.3. Insert the screws (M4 x 12) provided and tightenthem gently until the stand is properly fitted.Removing the pedestal from the TVBe sure to remove the pedestal in the following waywhen using the wall-hanging bracket or repackingthe TV.• Put the TV onto a work table with the screen paneldown on the clean and soft cloth. Leave the stand(s)protruding over the edge of the surface.• Unsrew the screws that fixing the stand(s).• Remove the stand(s).When using the wall-hanging bracketPlease contact your local Panasonic dealer topurchase the recommended wall-hanging bracket.Holes for wall-hanging bracket installation;Rear of the TVaba (mm) 200b (mm) 200View from the sideaDepth ofscrew (a)min. (mm) 5max. (mm) 10Diameter M6Note: The screws for fixing the TV onto the wall-hangingbracket are not supplied with the TV.