- 39 -Timer ProgrammingThe Timer Programming menu allows you to choose programmes that youwant to remind watching or record to the USB HDD. At the correct time, theTV will tune to the correct channel even if the TV is in Standby mode.1. Select the forthcoming programme or channel with / / / andpress OK to access2. Select USB HDD Rec. / Reminder with / and press OK to set● To check / change / cancel a timer programming eventRecording Timer Programming Editing timer programming● LED will turn to orange in Standby mode if Timer Programming is set.● To return to TV GuideRETURN● If you select the current programme, a confirmation screen askingwhether you want to watch or record the programme appears. SelectTimer Programming with / and press OK to set USB HDD Rec. torecord from the time you finish the timer programming event setting.= Note =● Not valid in Analogue TV● Timer Programming only works reliably if correct time information isreceived via the signal from the broadcaster or service provider.● No other channels can be selected while the recording of TimerProgramming is in progress.● When recording programmes to the USB HDD, be sure to format the USBHDD and enable it to record in USB Device Setup.Recording USB HDD setup
