- 31 -● No signal is received and no operation is performed for 10 minutes whileNo signal Power off is set to On.Settings Timer No signal Power off= Note =● This function does not affect the recording of Timer Programming and OneTouch Recording.AspectChange the aspect ratio (image size) with ASPECT.● Enjoy viewing the image at its optimum size and aspect.■ To change the aspect ratio manually1. Display Aspect Selection list with ASPECT2. Select the mode with / and press OK to set● You can also change the mode pressing ASPECT.(Press repeatedly until you reach the desired mode.)16:9:Directly displays the image at 16:9 without distortion (anamorphic).14:9:Displays the image at the standard 14:9 without distortion.Just:Displays a 4:3 image full-screen. Stretching is only noticeable at the leftand right edges.4:3:Displays the image at the standard 4:3 without distortion.Zoom:Displays a 16:9 letterbox or 4:3 image without distortion.4:3 Full:Displays a 4:3 image enlarged horizontally to fit the screen.● For HD (High definition) signalsSidecut Just:Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching isonly noticeable at the left and right edges.● For HD (High definition) signals