- 17 -= Note =● External equipment and cables shown are not supplied with this TV.● Please also read the manual of the equipment being connected.● Keep the TV away from electronic equipment (video equipment, etc.) orequipment with an infrared sensor, otherwise distortion of image / soundmay occur or operation of other equipment may be affected.● When using an HDMI cable, it is recommended to use fully wired one.● Check the terminal type and cable plugs are correct when connecting.Selecting channel1. Select Digital TV or Analogue TV with TV● You can also select the mode pressing INPUT/OK/HOLD for MENUbutton repeatedly on the control panel of the TV.● The selected mode is displayed on the top left of the screen.2. Select a channel with Channel Up / Down or numeric buttons● Press the numeric buttons to select a channel position with 2 or more-digit (e.g. 399, press ).■ To select a channel from the channel list1. Display the channel list with OK2. Select a channel from the list with / and press OK to watch■ To select a channel using information banner1. Display information banner with INFO if it is not displayed2. Select a channel with / and press OK to watch while the banner isdisplayedWatching Basic Information banner■ To select a channel using TV Guide1. Display TV Guide with GUIDE2. Select the current programme or channel with / / / and pressOK to access3. Select View with / and press OK to watch (Digital TV)Watching TV Guide
