- 25 -= Note =● It is recommended to connect the devices to the TV’s USB ports directly.● You cannot use two or more of the same kind of USB devicessimultaneously except USB Flash Memory or USB HDD.● Use USB 3 port for connecting the USB HDD.● Use USB 1 port for connecting the Communication Camera.● Some USB devices or USB HUB may not be used with this TV.● You cannot connect any devices by using USB card reader.● Additional information for the devices may be on the following website.(English only)http://panasonic.net/viera/support■ To listen with speakersDIGITAL AUDIO OUTOptical digital audio cableAmplifier with speaker system● To enjoy the sound from the external equipment in multi-channel sound(e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For theconnections, read the manuals of the equipment and amplifier.Watching external inputConnect the external equipment (VCRs, DVD equipment, etc.) and you canwatch through the input.1. Display the input selection menu with AV2. Select the input mode connected to the equipment with / and pressOK to watch (The selected mode is displayed on the top left of the screen)● You can also select the input pressing AV on the remote control orINPUT/OK/HOLD for MENU button on the control panel of the TV. Pressrepeatedly until the desired input is selected.● To switch between COMPONENT and VIDEO in AV, select with / .● You can label or skip each input mode. Skipped inputs will not bedisplayed when AV is pressed. (Input Labels)Settings Setup Display Settings
