Panasonic TH-70LF50U Operating Instructions Manual

Also see for TH-70LF50U: Specification

Contents

Panasonic TH-70LF50U Operating Instructions Manual Manual pdf 35 page image

1/2SIGNALINPUT LABELECO MODE SETTINGSWOBBLINGSET UPOFFCOMPONENT/RGB-IN SELECTRGBSCREENSAVERNO ACTIVITY POWER OFFDISABLEOSD LANGUAGE ENGLISH (US)ECO MODECUSTOM: The menu of power consumption reduction is individually set.ON: The following xed values are set to the menu of power consumption reduction. Individual setting is not available.NO SIGNAL POWER OFF: ENABLEPC POWER MANAGEMENT: ONDVI-D POWER MANAGEMENT: ONPOWER SAVE: SENSORUsing Remote ControlWhen is pressed, the “ECO MODE” settingchanges.ECO MODE ONCustom settingsThe menu of the power consumption reduction is individually set. This setting is enabled when “ECO MODE” is set to“CUSTOM”.NO SIGNAL POWER OFFEquipment power supply is turned OFF when there is no signal.When this is set to “ENABLE”, the power supply of the unit goes Off 10 minutes after the input signals stop.Note:This function is effective during normal viewing (one picture screen).PC POWER MANAGEMENTWhen this function is set to ON, it operates under the following conditions to turn the power on or off automatically.When no pictures are detected for 30 or so seconds during PC signal input:Power is turned off (standby); the power indicator lights up orange.When pictures are subsequently detected:Power is turned on; the power indicator lights up green.Notes:• This function operates only during input from PC IN terminal.• This function is effective when “SYNC” is set to “AUTO” and during normal viewing (one picture screen).DVI-D POWER MANAGEMENTWhen this function is set to ON, it operates under the following conditions to turn the power on or off automatically.When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:Power is turned off (standby); the power indicator lights up orange.When pictures (sync signal) are subsequently detected:Power is turned on; the power indicator lights up green.Note:This function operates only during DVI signal input.POWER SAVEThis function adjusts the brightness of the backlight to reduce power consumption.OFF: This function does not operate.ON: Backlight brightness is reduced.SENSOR: The backlight brightness is automatically adjusted according to the viewing environment.Note:When this function is set to “ON” or “SENSOR”, the “BACKLIGHT” setting in the PICTURE menu is disabled.1 select2 adjustECO MODE SETTINGSNO SIGNAL POWER OFFENABLEOFFPOWER SAVEDVI-D POWER MANAGEMENTOFFPC POWER MANAGEMENTONCUSTOMECO MODE35ECO MODE SETTINGS