Panasonic TH-70LF50U Operating Instructions Manual

Also see for TH-70LF50U: Specification

Contents

Panasonic TH-70LF50U Operating Instructions Manual Manual pdf 29 page image

000SOUNDNORMALNORMALIZESTANDARD1/2OFFTREBLEAUDIO MENUBALANCEBASSSURROUND29SOUND AdjustmentNote: BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.1 Press to display the SOUND menu.Press to select the menu to adjust.Select the desired level by listening to the sound.Press to exit from adjust mode.2 Select to adjust each item.While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)3Item DetailsAUDIO MENUSTANDARD: Emits the original sound.DYNAMIC: Accentuates sharp sound.CLEAR: Attenuates human voice.BASS Adjusts low pitch sounds.TREBLE Adjusts high pitch sound.BALANCE Adjusts left and right volumes.SURROUND Select ON or OFF.SDI SOUND OUTPUTThis menu is available only when selecting a slot that the following terminal board is installed:HD-SDI Terminal Board with audio (TY-FB10HD)2/2SOUND OUTLEFT CHANNELRIGHT CHANNELCHANNEL 1CHANNEL 1OFFLEVEL METER OFFSDI SOUND OUTPUT Item DetailsLEFT CHANNEL CHANNEL 1 to CHANNEL 16Selects left audio channel.RIGHT CHANNEL CHANNEL 1 to CHANNEL 16Selects right audio channel.SOUND OUT ON OFFON: Enables audio output.OFF: Disables audio output.LEVEL METEROFF 1-8CH 9-16CHSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4 channelseach on both right and left sides of the display.OFF: Hides the audio level meter.1-8CH: Displays the audio level meter (1-8ch)9-16CH : Displays the audio level meter (9-16ch)