SCREENSAVERSTARTMODEFINISH TIMESTART TIMETIME OF DAY6 : 1512 : 30PRESENT TIME OF DAY MON 15 : 00SCREENSAVERSTARTMODESAVER DURATIONSHOW DURATIONINTERVAL12 : 003 : 00PRESENT TIME OF DAY MON 15 : 00SCREENSAVERSTARTMODESCREENSAVER DURATIONSTANDBY AFTER SCR SAVER6 : 15PRESENT TIME OF DAY MON 15 : 002131/2SIGNALINPUT LABELECO MODE SETTINGSWOBBLINGSET UPOFFCOMPONENT/RGB-IN SELECTRGBSCREENSAVERNO ACTIVITY POWER OFFDISABLEOSD LANGUAGE ENGLISH (US)33SCREENSAVER (For preventing image retention)Setup of SCREENSAVER TimeAfter selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become availablefor selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contourof image.Press to select START TIME / FINISH TIME (When TIME OFDAY is selected).Press to select SHOW DURATION / SAVER DURATION (WhenINTERVAL is selected).Press to select SCREENSAVER DURATION (When STANDBYAFTER SCR SAVER is selected).Press to setup.button: Forwardbutton: BackNote: Timer function will not work unless “PRESENT TIME OF DAY” is set.Notes:• Pressing “ ” or “ ” button once changes the Time 1 minute.[However, switching occurs every 15 minutes when Periodic Time is selected.]• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.• “SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” canbe set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCRSAVER” will not be activated.Press to display the SET UP menu.Press to select “WOBBLING”.Press to select “ON” or “OFF”.ON: Shifts the position of the display image on a xed timeinterval .Press to exit from adjust mode.Notes:• If “MULTI DISPLAY SETUP” is set to “ON”, this function does not operate.• When this function is operating, part of the screen may appear to be missing.WOBBLING