56SETUP menuCUSTOM SETTINGSSet the individual “Image Retention Reduction” menu.1 Select “CUSTOM SETTINGS”.CUSTOM SETTINGSRESETEXTENDED LIFE SETTINGSEXPRESS SETTINGS2 access1 select2 To set each menu to the recommended setting:Select “RECOMMENDED SETTINGS”.30OFFUNLOCKBRIGHTDYNAMICMIDPICTUREPICTURE MENUEXTENDED LIFE SETTINGSRECOMMENDED SETTINGSSIDE BAR ADJUSTNANODRIFT SAVERPEAK LIMITLOCK SETTINGSAPPLY TO CURRENT INPUTAPPLY TO ALL INPUTS2 set1 selectEach menu will be set as same asthe “EXPRESS SETTINGS”.3 Set each menu.30OFFUNLOCKBRIGHTMIDPICTUREPICTURE MENUEXTENDED LIFE SETTINGSRECOMMENDED SETTINGSSIDE BAR ADJUSTNANODRIFT SAVERPEAK LIMITLOCK SETTINGSAPPLY TO CURRENT INPUTAPPLY TO ALL INPUTSPICTURE MENU DYNAMIC2 adjust1 select4 To lock each menu setting:Set the “LOCK SETTINGS” to “LOCK”.30OFFUNLOCKBRIGHTMIDPICTUREPICTURE MENUEXTENDED LIFE SETTINGSRECOMMENDED SETTINGSSIDE BAR ADJUSTNANODRIFT SAVERPEAK LIMITLOCK SETTINGSAPPLY TO CURRENT INPUTAPPLY TO ALL INPUTSPICTURE MENU DYNAMIC2 adjust1 selectWhen a menu is locked, it is grayed out and cannot be set.“PICTURE MENU” and “PICTURE” will no longerbe able to set in the “PICTURE” menu, and they arelabeled with icon to indicate their locked status. Also,“NORMALIZE”, “MEMORY SAVE” and “MEMORYLOAD” are not available.30PICTURE MENU0NORMALPICTURENORMALIZEBRIGHTNESSSHARPNESSCOLOR TEMPADVANCED SETTINGSMEMORY SAVEMEMORY LOADMEMORY EDITCOLOR0TINTDYNAMIC05EXTENDED LIFE SETTINGS5 Select the input to apply the settings.30OFFUNLOCKBRIGHTDYNAMICMIDPICTUREPICTURE MENUEXTENDED LIFE SETTINGSSIDE BAR ADJUSTNANODRIFT SAVERPEAK LIMITLOCK SETTINGSAPPLY TO CURRENT INPUTAPPLY TO ALL INPUTSRECOMMENDED SETTINGS2 set1 select6 Select “YES”.YES NOEXTENDED LIFE SETTINGSAPPLY TO CURRENT INPUT 1 select2 setRESETReset the “Image Retention Reduction” menu to the factory settings. Each menu will be unlocked.1 Select “RESET”.CUSTOM SETTINGSEXTENDED LIFE SETTINGSEXPRESS SETTINGSRESET2 access1 select2 Select the input to reset the settings.RESET CURRENT INPUTRESET ALL INPUTSEXTENDED LIFE SETTINGS 2 set1 select3 Select “YES”.YES NOEXTENDED LIFE SETTINGSRESET CURRENT INPUT 1 select2 set