36Picture ProlesLoad proles and apply the picture adjustment values to the display as follows.Notes:• Loaded proles are stored in memory according to the selected input interface. (see page 18)• When the settings are locked in “EXTENDED LIFE SETTINGS”, proles cannot be loaded.1 In the PICTURE menu, select “MEMORY LOAD”.MEMORY SAVEMEMORY LOADMEMORY EDIT2 access1 select2 Select the prole to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 set1 selectProles are labeled with these icons to indicate theirlocked status. (see below) on the remote control>1 Press to list the proles.2 Select the prole to load.MEMORY1212. [ 2]1. [ ] MEMORY1MEMORY22. [ 1]2 set1 selectProles are labeled with these icons to indicate theirlocked status. (see below)To load proles 1–91 Press a button in the range – .2 Select “OK”.OK CANCELMEMORY LOADLOAD FROM ”MEMORY2” 1 1 select2 setTo load proles 10–16Example: To load prole 161 Press .The prole number is displayed in the upper-rightcorner of the screen.162 Select “OK”.OK CANCELMEMORY LOADLOAD FROM ”MEMORY16” 1 select2 setLock1Picture adjustment values are shown.Lock2Picture adjustment values are hidden.PICTURE MENU DYNAMIC2505NORMALPICTURENORMAL IZEBRIGHTNESSSHARPNESSCOLOR TEMP6COLOR0TINTADVANCED SETTINGSCan bespecied.Cannot bespecied.PICTURE MENU DYNAMICPICTURENORMAL IZEBRIGHTNESSSHARPNESSCOLOR TEMPCOLORTINTADVANCED SETTINGSCan bespecied.Cannot bespecied.Loading prolesLoading locked proles…In the PICTURE menu, proles are labeled with these iconsto indicate their locked status.PICTURE MENU DYNAMIC250PICTURENORMAL IZEBRIGHTNESS:Lock1:Lock2Operations with locked proles are restricted. (see page 38)Picture adjustment values in the PICTURE menu cannot be changed, except for the “PICTURE MENU”.Once you edit the “PICTURE MENU” setting, you can edit “PICTURE”, “BRIGHTNESS”, and other picture adjustmentvalues.PCFULLMEMORY NAME: MEMORY2NANODRIFTWhen prole is being loaded,prole name is displayed.