Panasonic TH-65VX300U Operating Instructions Manual

Also see for TENTATIVE TH-65VX300U: Brochure Manual Operating instructions

Contents

Panasonic TH-65VX300U Operating Instructions Manual Manual pdf 40 page image

40SOUND Adjustment1 Display the menu screen.2 Select “SOUND”.SETUPPOS. /SIZESOUNDPICTURE2 access1 select3 Select the item and set.2 adjust1 selectNORMALIZE1VOLUMEAUDIO MENU STANDARDBASS 0MID 0TREBLE 0BALANCE 0SURROUND OFF4 Exit the menu.While the “SOUND” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment valuesare returned to the factory settings.Helpful Hint ( NORMALIZE Normalization)Item DetailsAUDIO MENUSTANDARD: Emits the original sound.DYNAMIC: Accentuates sharp sound.CLEAR: Attenuates human voice.BASS Adjusts low pitch sounds.MID Adjusts normal sounds.TREBLE Adjusts high pitch sound.BALANCE Adjusts left and right volumes.SURROUND Select ON or OFF.VOLUME Adjust the sound volume level.Item DetailsLEFT CHANNEL CHANNEL 1 to CHANNEL 16Selects left audio channel.RIGHT CHANNEL CHANNEL 1 to CHANNEL 16Selects right audio channel.SOUND OUT ON OFFON: Enables audio output.OFF: Disables audio output.LEVEL METEROFF 1-8CH 9-16CHSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4channels each on both right and left sides of the display.OFF: Hides the audio level meter.1-8CH: Displays the audio level meter (1-8ch)9-16CH : Displays the audio level meter (9-16ch)SDI SOUND OUTPUTThis menu is available only when selecting a slot that any of the following terminal boards is installed:HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDITerminal Board for 3D (TY-FB30DHD3D)CHANNEL 1LEFT CHANNELSDI SOUND OUTPUT 2 /2CHANNEL 2RIGHT CHANNELONSOUND OUTOFFLEVEL METERNote: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.