99:99MONDAY/TIME SETUPTIME MON 99:99SETTIMEDAY2/2SETUPMULTI DISPLAY SETUPPORTRAIT SETUPON/OFF TIMER SETUPNETWORK SETUPDAY/TIME SETUPDISPLAY ORIENTATION LANDSCAPE36DAY/TIME SETUP / ON/OFF TIMER SETUPDAY/TIME SETUPThe timer can switch the Plasma Display ON or OFF.Before attempting Timer Set, confirm the TIME and adjust if necessary. Then set POWER ON TIME / POWER OFFTIME.Press to display the SETUP menu.Press to select ON/OFF TIMER SETUP or DAY/TIMESETUP.Press to display the ON/OFF TIMER SETUP screen orDAY/TIME SETUP screen.2Press to select DAY or TIME.Press to set up DAY or TIME.button: Forwardbutton: BackNotes:• Pressing “ ” or “ ” button once changes TIME 1 minute.• Pressing “ ” or “ ” button continuously changes TIME by 15 minutes.Press to select SET.Press to store DAY/TIME SETUP.Notes:• SET cannot be selected unless TIME is set.• Unless setting the present time other than “99:99”, “DAY” and “TIME” cannot be set.• The settings of “DAY” and “TIME” are reset when leaving the display turned off for about 7days for the following reasons:Pressing switch of the unit to turn off the display.Disconnecting the AC cord.Interruption of power supply.112Press to select POWER ON TIME / POWER OFF TIME.Press to set up POWER ON TIME / POWER OFF TIME.button: Forwardbutton: BackNotes:• Pressing “ ” or “ ” button once changes POWER ON TIME/ POWER OFF TIME 1 minute.• Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFFTIME by 15 minutes.Press to select POWER ON FUNCTION / POWER OFF FUNCTION.Press to select ON.Note:Timer function will not work unless “TIME” is set.210:000:00ON/OFF TIMER SETUPPOWER OFF FUNCTIONPOWER ON FUNCTION OFFOFFTIME 99:99POWER OFF TIMEPOWER ON TIMEON/OFF TIMER SETUP