BLACK EXTENSIONGAMMAINPUT LEVELADVANCED SETTINGSNORMALNORMALIZEW/B LOW BW/B HIGH RW/B LOW RW/B LOW GW/B HIGH GW/B HIGH B002.2000000250005PICTURENORMALNORMALIZESTANDARDBRIGHTNESSSHARPNESSPICTURE MENUCOLORPICTURETINTADVANCED SETTINGSCOLOR TEMP NORMAL29PICTURE Adjustments1ADVANCED SETTINGSEnables fine picture adjustment at a professionallevel (see next page).Press to enter AdvancedSettings.While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)Press to display the PICTURE menu.Press to select the menu to adjust.Select the desired level by looking at the picture behind the menu.Select to adjust each item.Note:Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, inputand menu setting.2Press the left or right button to switch between modes.MONITORSTANDARDCINEMADYNAMICSTANDARDFor viewing in standard (evening lighting) environments.This menu selects the normal levels of BRIGHTNESSand PICTURE.DYNAMICFor viewing in brighter environments.This menu selects higher than normal levels ofBRIGHTNESS and PICTURE.CINEMAFor use in viewing tone-focused pictures withbrightness reduced.MONITORFor use when creating broadcast or movie content. Withthis picture, even if the overall average picture level (APL)changes, the brightness of areas with the same signallevel does not change.Notes:● When “MONITOR” is selected in PICTURE MENU, thefollowing menu items cannot be set.EXTENDED LIFE SETTINGS: PEAK LIMIT (see page 41)MULTI DISPLAY SETUP menu: VIDEO WALL UNIFORMITY (see page 48)PORTRAIT SETUP menu: VIDEO WALL UNIFORMITY (see page 50)● If you would like to change the picture and color of theselected PICTURE menu to something else, adjust usingthe items in the PICTURE menu. (see next page)Press the left or right button to switch between modes.NORMAL (9300K) COOL (11500K) WARM (6500K)