Panasonic TH-65PF50U Operating Instructions Manual

Also see for TH-60PF50U: Operating instructions

Contents

Panasonic TH-65PF50U Operating Instructions Manual Manual pdf 12 page image

12(8Ω,20W[10W+10W])AUDIOOUTRLVIDEOOUTAUDIOOUTRL,Y, PB , P ROUTP RP BY(8Ω,20W[10W+10W])VIDEO and COMPONENT / RGB IN connectionNotes:• Change the “COMPONENT/RGB-IN select” setting in the “SETUP”menu to “COMPONENT” (when COMPONENT signal connection)or “RGB” (when RGB signal connection). (see page 51)• Signals input to COMPONENT/RGB IN terminals correspond toSYNC ON G or SYNC ON Y.RCA-BNCAdapter plugRCA-BNCAdapter plugDVD PlayerVCRComputer RGB CamcorderConnectionsVideo equipment connectionSLOT: Terminal board (optionalaccessories) insert slot(see page 6)Note:The right side slot is for terminal boardwith 2-slot width. The terminal boardwith 1-slot width does not function wheninstalled in the right side slot.AV IN (HDMI):HDMI Input Terminal(see page 13)Connect to video equipmentsuch as VCR or DVD player.WIRELESSMODULE, LAN:Refer to “OperatingInstructions, NetworkOperations”.DVI-D IN: DVI-D Input Terminal (see page 13)PC IN: PC Input Terminal Connect to video terminal ofPC or equipment with Y, P B(C B) and P R (C R ) output.(see page 14)SERIAL:Control the Plasma Displayby connecting to PC.(see page 15)3D IR TRANSMITTER:Connect the 3D IRTRANSMITTER (optionalaccessory).Terminals are on the bottom side of the Plasma Display.Note:Additional equipment, cables and adapter plugs shown are not supplied with this set.AUDIO L-R: Shared with VIDEO andCOMPONENT/RGB INEx. TH-65PF50UAV IN (VIDEO): Composite Video Input Terminal(see below)COMPONENT/RGB IN: Component/RGB Video InputTerminal (see below)