Panasonic TH-58PF12WK Operating Instructions Manual

Contents

Panasonic TH-58PF12WK Operating Instructions Manual Manual pdf 47 page image

3D Y/C Filter (NTSC) On1/2SignalScreensaverExtended life settingsPCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component/RGB-in selectRGBInput labelPower saveSetup3D Y/C Filter (NTSC)Colour systemSignalOnAutoCinema realityPanasonic Auto (4:3)Off4:3[ AV ]Noise reduction OffRefresh Rate 100 HzCinema realitySignalOffH-Freq.Dot Clock Freq.kHzMHz63.98108.0V-Freq. Hz60.02Noise reduction Off[ Digital ]Signal Format 1280×1024/60Refresh Rate 100 HzCinema realitySignalOff[ Component ]Noise reduction OffXGA Mode AutoH-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60Refresh Rate 100 HzSyncSignalH-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60[ RGB ]Cinema realityNoise reductionXGA ModeRefresh RateAutoOffOffAuto100 Hz473D Y/C Filter – For NTSC AV imagesSelect “Signal” from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)Press to select the “3D Y/C Filter (NTSC)”Press to set On / Off.Note:When On, this setting only affects NTSC input signals.Setup for Input SignalsSignal menuPress ACTION ( ) buttonFor Video (S VIDEO) For RGBFor Component For DigitalPress to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.34Press to display the Setup menu.Press to select the “Signal”.Press to display the Signal menu.21Note:“Signal” setup menu displays a different setting condition for each input signal.