1/2SignalScreensaverExtended life settingsPCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component/RGB-in selectRGBInput labelPower saveSetupExpress settingsCustom settingsResetExtended life settings30Picture ModeContrastExtended life settingsDynamicSide panelNANODRIFT SaverLock settingsPeak limitHighHigh midunlockApply to current inputApply to all inputsOffRecommended settings35Extended life settingsSide panelDo not display a picture in 4:3 mode for an extended period,as this can cause an image retention to remain on the sidepanels on either side of the display eld.To reduce the risk of such an image retention, illuminatethe side panels.This function may be applicable to the non-picture area.Off: Darken both ends.Low: Make it dark gray.Mid: Make it gray.High: Make it light gray.Notes:• To reduce the occurrence of image retention, set the Side panel to High.• The side panel may ash (alternate black/white) depending on the picture being shown on the screen. Using Cinemamode will reduce such ashing.side panel4:3 ScreenDisplayimageretentionP out P P and PNon picture areaReduces screen image retentionThe following settings are setup to reduce image retention:Image Retention Reduction Menu“Extended life settings” enables you to set the following 5 menus (Image Retention Reduction Menu) as recommendedvalues or set them individually.Picture ModeContrast“Picture Mode” and “Contrast” are same as “Picture” menu items (see page 26). The settings of this menu will bereected to the “Picture” menu.Set to the recommended valueSet individuallyReset to the factory settingsImage Retention ReductionMenu