Panasonic TH-58PF12WK Operating Instructions Manual

Contents

Panasonic TH-58PF12WK Operating Instructions Manual Manual pdf 46 page image

1/2SignalScreensaverExtended life settingsPCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component/RGB-in selectRGBInput labelPower saveSetup1/2SignalScreensaverExtended life settingsPCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)YUV/RGB-in selectRGBInput labelPower saveSetup46Setup for Input SignalsComponent / RGB-in selectSelect to match the signals from the source connected to the Component / RGB input terminals.Y, PB, PR signals “Component”RGB signals “RGB”12Press to display the Setup menu.Press to select the “Component / RGB-in select”.Press to select the desired input signal.Component RGBPress to exit from adjust mode.Notes:• Selection may not be possible, depending on which optional board is installed.• Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).3YUV / RGB-in selectSelect to match the signals from the source connected to the DVI input terminals.YUV signals “YUV”RGB signals “RGB”12Press to display the Setup menu.Press to select the “YUV / RGB-in select”.Press to select the desired mode.YUV RGBPress to exit from adjust mode.Notes:• Selection may not be possible, depending on which optional board is installed.• Make setting of the selected input terminal (SLOT1 or SLOT2).3