Panasonic TH-58PF12WK Operating Instructions Manual

Contents

Panasonic TH-58PF12WK Operating Instructions Manual Manual pdf 25 page image

251:1 Pixel Mode Adjusts the display size when 1125i, 1125p or 1250i signal is input.Notes:• Select On when you would like to replay 1920 × 1080 input signal.• Applicable input signal;1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i• Select Off when ickering is shown around the image.• H-Size and V-Size cannot be adjusted when On is selected.Off On1:1 Pixel Mode(2k1k)(For 2k1k signals)When the input signal is a 2k1k signal (2048 × 1080 / 24p, 2048 × 1080 / 24sF), the display sizeis adjusted as follows.Off On (Left) On (Center) On (Right)Note:2k1k signals can only be received when the Dual Link HD-SDI Terminal Board (TY-FB11DHD) is installed.Adjusting Pos. /SizeWhile the Pos. /Size display is active, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)