Panasonic TH-58PF12WK Operating Instructions Manual

Contents

Panasonic TH-58PF12WK Operating Instructions Manual Manual pdf 19 page image

19MULTI PIPTransparent Function and Insertion Function:Two functions are available for blend PIP: the transparent function and the insertion function. Set these functions with“Transparency” or “Insert” in “MULTI PIP Setup”. (see page 43)Transparent Function:Data such as text are displayed transparently on thebackground image.Insertion Function:The sub screen image is divided into transparent and non-transparent areas, and only the non-transparent areas areinserted and displayed on the background image.Note:Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the blend PIPfunction to make a composite screen display, you may be violating the copyright under copyright law. It is prohibited to show or alterthe copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder.Swapping Screens Selecting the Target Screen for OperationsEach time this button is pressed, the main screenand sub screen are swapped.Each time this button is pressed, the target screenfor operations changes.Two screens(P and P)MainscreenSubscreenTwo screens(P out P)Two screens(P in P)PCINPUT1PCINPUT1Main screen Sub screenMain screen input mode Sub screen input modeOperations on themain screenOperations on thesub screenNotes:• When operations are performed for the sub screen, thesub screen audio is played.• If no operations are performed, the operation targetreturns to the main screen after about 5 seconds*. Youcan also return to main screen operations by operatingthe remote control buttons (except for ).* It takes more than 5 seconds if a slot mounted with a DualHDMI Terminal Board (TY-FB10HMD) is selected.Selecting the Sub Screen Position (During P in P Display)Each time this button is pressed, the sub screen position changes.Note:Some sub screen positions may hide the displayof the menu screen.Notes:• Do not use the two-screen display for a long time. It will cause a permanent image retention to remain on the screen.• If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.• Sound output is from the picture which is selected in Audio OUT (PIP) (see page 31).• In two-screen display, the same input mode cannot be selected for the main picture and sub picture.• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity ofthe pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signalsdisplayed on the main picture and depending on the two-screen display mode.• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.• Computer screen picture is displayed in a simplied format, and it may not be possible to discern details on them satisfactorily.• Following combinations of two analog signals cannot be displayed simultaneously;Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)• 2k1k signals that are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD) cannot be displayed in two-screen display.