69Options AdjustmentsItem AdjustmentsInput lockLocks the input switch operation.Off HDMI DisplayPort DIGITAL LINK DVI-D1 DVI-D2 PC COMPONENT/RGBVIDEO USB OffNotes:$K J \ J +$ ? ? K''+Button lockOff On MENUOff: All the buttons on main unit can be used.MENU: Locks MENU button on main unit.On: !& KZ +Sets Button lock with the unit buttons in the following procedure.Off: ' « INPUT ' « =' « *MENU: Press MUTE ' « + ' « "' « MUTEOn: =' « *' « ' « *Remocon User levelOff User1 User2 User3Off: You can use all of the buttons on the remote control.User1: You can only use , , , , , buttons on the remote control.User2: You can only use and button on the remote control.User3: Locks all the buttons on remote control.PC Auto SettingOff OnOff: K & J ' : ? ' POSITION menu is performed, the Auto function operates.On: In addition to operation of a remote control and the OSD menu, an Auto Setup function is dynamically ' G +Off-timer functionEnable: K''= ' +Disable: K''= ' +Note: : K''= +Initial Power ModeNormal On StandbySets the power mode of the unit for when the power recovers from failure or after plugging off and in again.Normal: Power returns in as the same state as before the power interruption.Standby: Power returns in standby mode. (Power Indicator : red/orange)On: Power returns in power On. (Power Indicator : green)Note: J: J ' ? +Clock DisplayOff: Not display the clock.On: Display the clock.The clock is displayed at the lower left of the screen when button is pressed.10:00Note: JQ : & J G '& J K +LAN ControlProtocolSelect the LAN control protocol.Protocol 1: Control with the Panasonic Display sequence.Protocol 2: Control with the sequence that compatible with Panasonic Projector.Information Timing Set up the informing manner if error warning occured.POWER Button Lock(TH-55LFV70U only)Set the lock setting for POWER button in unit buttons on back of the display.Off: POWER button operation is enabled.On: POWER button operation is disabled.Note:This function is enabled for only TH-55LFV70U. For TH-55LFV70W, it will not appear on the menu.Normalisation &: G ' \ : G K'' +Press the [ ] button on main unit together with button on the remote control and hold for more than 5 seconds. The J & ? +