10VESA MountingTo mount this Display to a wall, you will have to obtain a standard wall-mounting kit.1. Lay a protective sheet on a table,which was wrapped around this Displaywhen it was packaged, beneath thescreen surface so as not to scratch thescreen face.2. Ensure you have all accessories formounting this Display (wall mount,ceiling mount, etc).3. Follow the instructions that came withthe wall mounting kit. Failing to followthe correct mounting procedures couldresult in damage to the equipment, orinjury to the user or install personnel.The product warranty does not coverthe damage caused by improperinstallation.4. For the wall-mounting kit, use M6mounting screws (having a length 10mm longer than the thickness of themounting bracket) and tighten themsecurely.Protective SheetTableVESA GridCautions when installing or movingTo prevent this Display from falling:$ ? G J+$ J +$ Handle with care and with more than two ? G J+# mind that this Display is easy to break fromcarelessness.$ For ceiling installation, we recommendinstalling this Display with metal bracketswhich are commercially available. Fordetailed installation instructions, refer to theguide received with the respective bracket.$ To lessen the probability of injury anddamage resulting from fall of this Display incase of earthquake or other natural disaster,be sure to consult the bracket manufacturerfor installation location.$ For portrait installation, please turn thisDisplay right.HandleWhen you install a display by multi, please prepare for 0.5 mm betweeneach display in the state of the power supply OFF.90NOTE:$ Please do not rotate and use it for left-hand side.