Panasonic TH-55LFV70U Operation Instruction Manual

Also see for TH-55LFV70U: Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-55LFV70U Operation Instruction Manual Manual pdf 15 page image

15ConnectionsBasic format for control dataThe transmission of control data from the computerstarts with a STX signal, followed by the command, theparameters, and lastly an ETX signal in that order. If thereare no parameters, then the parameter signal does notneed to be sent.Start(02h)3-charactercommand (3 bytes)Colon Parameter(s)(1 - 5 bytes)End(03h)STX C1 C2 C3 P1 P2 P3 P4: P5 ETXNotes:$ If multiple commands are transmitted, be sure to wait' ' ' ' +$ If an incorrect command is sent by mistake, this unit will Z_^ & +$ Consult an Authorized Service Center for detailinstructions on command usage.$ With the power off, this display responds to PONcommand only.CommandCommand Parameter Control detailsPON None Power ONPOF None Power OFFAVL *** Volume 000 - 100AMT 0 Audio MUTE OFF1 Audio MUTE ONIMS NoneVD1YP1HM1DV1DV2PC1DL1DP1UD1Input select (toggle)VIDEO IN input (VIDEO)K*K""QZ " (Component)HDMI input (HDMI)DVI-D1 IN input (DVI-D1)DVI-D2 IN input (DVI-D2)PC IN input (PC)!!"# DisplayPort inputUSB inputDAM NoneKK*FULLNORMK*]Screen mode select (toggle)^16:94:3]IR IN / IR OUT Terminals connectionUse a 3.5 mm stereo mini plug to connect from the IR OUT of the First LCD Display to the IR IN of the Second LCDDisplay. The IR signal from the First LCD Display will be sent to the Second LCD Display.First LCD Display Second LCD DisplayThird LCD Display* Stereo mini plug (M3)**At this time, IR receiver of the Second LCD Display will not work.It is possible to daisy-chained by repeating the above connection.`$ x z USB