Panasonic TH-55LFV70U Operation Instruction Manual

Also see for TH-55LFV70U: Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-55LFV70U Operation Instruction Manual Manual pdf 66 page image

66SETUPNetwork Setup LAN SetupDetailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter +Network settingsDIGITAL LINK modeNetwork controlOffAutoOffDisplay nameLVF70-00LAN setupDIGITAL LINK statusDigital Interface BoxAMX D. D.Crestron ConnectedTMOffOffExtron XTPResetLAN setupSaveDHCP OnNetwork control / IP address 169 254 1 1255 255 0 00 0 0 10Subnet maskGatewayPortMAC address102400:00:00:00:00:00 !" DHCP, IP address, Subnet mask, and Gateway settings1 Set DHCP. K'' : manually.2 Select the item and press .3 Enter an address.I192.168. 0. 8IP ADDRESS 1 Use to select a digit.2 Use to change a number.3 Press .Pressing will cancel the address change.4 G .PORT setting1 .2 Enter a port number.I01024PORT 1 Use to select a digit.2 Use to change a number.3 Press .Pressing will cancel the port number change. SaveSave the current network Setup. Each value set for DHCP, : &: ? J? G +'" J : & within the same network. DHCP (DHCP client function)To obtain an IP address automatically using a DHCP G : K +'< G : K''+ IP address (IP address display and setting)Enter an IP address if DHCP server is not used. Subnet mask (Subnet mask display and setting)Enter a subnet mask if DHCP server is not used. Gateway (Gateway address display and setting)Enter a gateway address if DHCP server is not used. PortSet the port number used for command control.The available setting range is 1024 – 65535.When the PJLink™ protocol is used, the port setting is notnecessary. MAC AddressDisplay the MAC address of this unit.Note:Shipping condition is below.[DHCP]: Off[IP address]: 192.168.0.8[Subnet mask]: 255.255.255.0¬ ? J^]+^+_+^Notes:$ To use a DHCP server, make sure the DHCP server is started.$ Contact your network administrator for details on settings.