55SETUPECO Mode SettingsSetup 1/2SignalDisplay ID settingsMonitor out(Digital)AutoMulti display settingsBackup input settingsScreensaverInput labelECO mode settingsWobbling OffDIGITAL LINK outPower ON screen delayOSD language English(UK)1 select2 adjustOnOnOnOnOffECO Mode settingsPower saveECO Mode CustomNo signal power offEnableHDMI power managementDVI-D1 power managementDVI-D2 power managementPC power managementECO ModeCustom: The menu of power consumption reduction is individually set.On: '? G '? + G G +No Signal power off: EnableHDMI Power management: OnDVI-D1 Power management: OnDVI-D2 Power managemanet: OnPC Power managemanet: OnPower save: OnUsing Remote ControlWhen : K* + ECO Mode OnCustom settings ' ? G J + ? K* +No signal power offEquipment power supply is turned Off when there is no signal. : ? J' K''^_ ' +Note:$ This function is effective during normal viewing (one picture screen).PC Power management$ When this function is set to On, it operates under the following conditions to turn the power on or off automatically.$ When no pictures are detected for 30 or so seconds during PC signal input:«? ''{ J@¡ ? +$ When pictures are subsequently detected:«? ¡ ? +Notes:$ This function operates only during input from PC IN terminal.$ ' '' G ? J G ? { @+DVI-D / HDMI Power management$ When this function is set to On, it operates under the following conditions to turn the power on or off automatically.$ When no pictures (sync signal) are detected for 30 or so seconds during DVI-D1 or DVI-D2 / HDMI signal input:«? ''{ J@¡ ? +$ When pictures (sync signal) are subsequently detected:«? ¡ ? +Note:$ This function operates only during each input.Power saveThis function adjusts the brightness of the backlight to reduce power consumption. Off: This function does not operate. On: Backlight brightness is reduced.