Panasonic TH-50PH30E Operating Instructions Manual

Also see for TH-42PH30ER: Product speci?cations Operating instructions

Contents

Panasonic TH-50PH30E Operating Instructions Manual Manual pdf 41 page image

OptionsAudio input select1/3Initial inputOnscreen display OnOffOffOff00Maximum VOL levelInitial VOL levelOffInput lockOffButton lockOffRemocon User levelTouch Panel settingsOptionsEnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain2/33/3OptionsOffRotateOnPower On Message (No activity power off)OffAll AspectManualAuto SetupOffPower On Screen Delay41Options AdjustmentsItem AdjustmentsAudio input select Set up the sound when an image input is selected. (see page 44)Touch Panel settings Set while using Touch Panel (available as an option). (see page 44)Onscreen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial inputAdjusts the input signal when the unit is turned on.Off PC VIDEO COMPONENT* HDMI DVI* “COMPONENT” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”.(see page 36)Notes:• Only the adjusted signal is displayed. (see page 15)• This menu is available only when “Input lock” is “Off”.Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 63 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.1 Press to display the Setup menu.5 Press to exit from Options menu.243Press to select “OSD Language”.Press for more than 3 seconds.Press to select “Options”.Press to display the Options menu.Press to select your preferred menu.Press to adjust the menu.OptionsShipping