Panasonic TH-50PH30E Operating Instructions Manual

Also see for TH-42PH30ER: Product speci?cations Operating instructions

Contents

Panasonic TH-50PH30E Operating Instructions Manual Manual pdf 31 page image

1/2SignalScreensaverExtended life settingsInput labelOffOffOffEnableOSD Language English (UK)Component/RGB-in selectRGBPower saveSetupDisablePC Power managementNo signal power offNo activity power offDVI-D Power management31Reduces power consumptionPress to select“Power save”“PC Power management”“DVI-D Power management”“No signal power off”“No activity power off”.Press to select “On (Enable)” or “Off (Disable)”.On (Enable) Off (Disable)Press to exit from Setup.123• Power save: When this function is turned On, luminous level of the Plasma Display issuppressed, so power consumption is reduced.• PC Power management: When this function is set to On, it operates under the following conditions to turn thepower on or off automatically.When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PCsignal input:→ Power is turned off (standby); the power indicator lights up orange.When pictures (HD/VD sync signals) are subsequently detected:→ Power is turned on; the power indicator lights up green.Notes:• This function operates only during PC signal input.•This function is effective when “Sync” is set to “Auto”, “Component / RGB-in select”is set to “RGB” and during normal viewing (one picture screen).• DVI-D Power management: When this function is set to On, it operates under the following conditions to turn thepower on or off automatically.When no pictures (sync signal) are detected for 30 or so seconds during DVI signalinput:→ Power is turned off (standby); the power indicator lights up orange.When pictures (sync signal) are subsequently detected:→ Power is turned on; the power indicator lights up green.Note:This function operates only during DVI signal input.• No signal power off: Equipment power supply is turned Off when there is no signal.When this is set to “Enable”, the power supply of the unit goes Off 10 minutes afterthe input signals stop.Note:This function is effective during normal viewing (one picture screen).• No activity power off: When this function is set to “Enable”, the power is turned off (standby) automaticallywhen there is no operation of the Plasma Display for 4 hours.Starting from 3 minutes before the turn off, the remaining time will be displayed.No activity power off 3minPress any key to abort.When the power is turned off due to this function, a message “Last turn off due to’No activity power off’.” is displayed next time the power is turned on.Note:During the screensaver is running, this function is disabled.