Panasonic TH-50PH30E Operating Instructions Manual

Also see for TH-42PH30ER: Product speci?cations Operating instructions

Contents

Panasonic TH-50PH30E Operating Instructions Manual Manual pdf 21 page image

0NormalNormaliseAuto SetupPos./SizeV-Pos0H-PosV-SizeDot ClockH-SizeClock Phase0Clamp PositionOver scan Off0000Notes:Unadjustable items are grayedout.Adjustable items differ dependingon the input signal and the displaymode.21Adjusting Pos./Size1 Press to display the Pos./Size menu.Press to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.32Notes:• Adjustment details are memorized separately for different input signal formats (Adjustments for component signalsare memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p ·24sF, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This pictureposition movement cannot be controlled by the Picture Pos./Size function.4Auto Setup When inputting a PC signal as an example, “H-Pos/V-Pos”, “H-Size/V-Size”, “Dot Clock” and “ClockPhase” are automatically corrected.This setting is enabled under the following conditions:• This setting is not activated during Multiple display or Digital Zoom.• When inputting an analog signal (Component/PC):This setting is enabled if “Component/RGB-in Select” (see page 36) in Setup menu is “RGB”.• When inputting a digital signal (HDMI/DVI):A PC format signal enables this setting.If other than a PC format signal, this setting is enabled with “Over scan” (see page 22) set to “Off”,and H-Size/V-Size cannot make automatic corrections.This setting will be invalid and will not work under the following conditions:• When VIDEO signal input• Aspect is set to “Just”• “Display size” in the Options menu (see page 42) is set to “On”Using Remote ControlWhen on the remote control is pressed, “Auto Setup” will be executed.When Auto Setup does not work, “Invalid” is displayed.Auto modeWhen the “Auto Setup“ is set to “Auto” in the Options menu (see page 43), automatic position adjustment starts:• When the display power is turned ON.• When the input signal is switched.