Panasonic TH-50BT300U Operating Instructions Manual

Also see for TH-42BT300U: Specification Specifications

Contents

Panasonic TH-50BT300U Operating Instructions Manual Manual pdf 63 page image

63Display of the FUNCTION button guidePressing the FUNCTION button can display the FUNCTION button guide to refer for the function of each button.Assigning functions to the FUNCTION button on the remote control enables a user to switchbetween show/hide and modes with just a single touch of a button. The function settings arecongured by using “FUNCTION BUTTON SETTINGS” in the SETUP menu (see page 56).The button functions are configured in two ways depending on the setting (On/Off) of “Studiomode” in the OPTIONS menu. Similarly, factory default settings vary as follows.Using FUNCTION buttonStudio mode: On Studio mode: OffFUNCTION Button 1FUNCTION Button 2FUNCTION Button 3FUNCTION Button 4FUNCTION Button 5FUNCTION Button 6FUNCTION Button 7FUNCTION Button 8WAVEFORM MONITORMARKER SETTINGSHV DELAYBLUE ONLY3D SETTINGSSIGNALCOLOR GAMUTSCROLLING BAROFF TIMEREXTERNAL SCALER MODETEST PATTERNSBLUE ONLY3D SETTINGSSIGNALCOLOR GAMUTSCROLLING BARIf the guide display is not needed, set “FUNCTION BUTTON GUIDE” in “FUNCTION BUTTON SETTINGS” to “OFF” (see page 56).The operation starts.FUNCTION1:WAVEFORM MONITOR 2:MARKER SETTINGS 3:HV DELAY 4:BLUE ONLY6:SIGNAL 7:COLOR GAMUT 8:SCROLLING BAR5:3D SETTINGS3D SETTINGS / SIGNAL / COLOUR GAMUTMenu is displayed.(Example: 3D SETTINGS)ON3D FUNCTIONAUTO3D INPUT FORMAT3D3D VIEWING MODENORMALLEFT/RIGHT SWAPON3D COLOR COMPENSATION3D SETTINGSSAFETY PRECAUTIONSPressing the FUNCTION button clears the menu.SCROLLING BAR / TEST PATTERNSConrmation screen (Example: SCROLLING BAR)YES N OFUNCTIONSCROLLING BAR• SCROLLING BARActivates the SCROLLING BAR ONLY screensaver.After 15 minutes, the display enters standby mode.Press toselect“YES”.Press.The operation starts.• TEST PATTERNSEach time you press , a different test pattern is displayed(seven in all).Color Bars Red GreenBlueFrame(2 lines × 2 dots)Black 1% windowTo exit this mode, press any button other than .To exit this mode, press any button.Note:PC POWER MANAGEMENT, DVI-D POWER MANAGEMENT and NO SIGNAL POWER OFF are deactivated duringSCROLLING BAR or TEST PATTERNS operation. (see page 42)Factory default settings