62Set up the sound when an image input is selected.Image input Audio input[SLOT INPUT]*1 SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO[VIDEO] SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO[COMPONENT]*2 SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO[HDMI] SLOT INPUT / VIDEO / COMPONENT / HDMI / DVI/PC / NO AUDIO[DVI] SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO[PC] SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIODVI/PC: Sound input for both DVI and PC.NO AUDIO: No audio input (Mute)*1 “SLOT INPUT” is displayed when a Terminal Board is installed.*2 “COMPONENT” may be displayed as “RGB” depending on the setting of “COMPONENT/RGB-IN SELECT”.(see page 40)When a Terminal Board with dual input terminals is installed“SLOT INPUT” is displayed as “SLOT INPUT A” and “SLOT INPUT B” and independent settings are available.To set other image inputs, you can select “SLOT INPUT A” and “SLOT INPUT B”.Image input Audio input[SLOT INPUT A] SLOT INPUT A / VIDEO / COMPONENT / DVI/PC / NO AUDIO[SLOT INPUT B] SLOT INPUT B / VIDEO / COMPONENT / DVI/PC / NO AUDIO[VIDEO] SLOT INPUT A / SLOT INPUT B / VIDEO / COMPONENT / DVI/PC / NO AUDIO[COMPONENT] SLOT INPUT A / SLOT INPUT B / VIDEO / COMPONENT / DVI/PC / NO AUDIO[HDMI] SLOT INPUT A / SLOT INPUT B / VIDEO / COMPONENT / HDMI / DVI/PC / NO AUDIO[DVI] SLOT INPUT A / SLOT INPUT B / VIDEO / COMPONENT / DVI/PC / NO AUDIO[PC] SLOT INPUT A / SLOT INPUT B / VIDEO / COMPONENT / DVI/PC / NO AUDIOWhen Image input and Audio input differ from each other, the Audio input is displayed as below.Notes:• HDMI Audio is selectable only for HDMI Input.• You cannot set audio of B for SLOT INPUT A, or audio of A for SLOT INPUT B.Audio input select2 Select audio input.1 Select image input.PCCOMPONENTFULLNANODRIFTPress buttonAudio input selectVIDEOVIDEOCOMPONENTCOMPONENTDVI/PCDVIHDMIHDMIDVI/PCPCSLOT INPUT SLOT INPUTOPTIONS AdjustmentsAudio input selectOnOnscreen displayOnStudio mode0ID selectOffRemote ID