Panasonic TH-50BT300U Operating Instructions Manual

Also see for TH-42BT300U: Specification Specifications

Contents

Panasonic TH-50BT300U Operating Instructions Manual Manual pdf 50 page image

501 Select mode by “MODE SELECT”.RGBMODE SELECTONR ON/OFFONG ON/OFFONB ON/OFFRGB/MONO SETTINGSRGB: Displays with one of red, green and blue signals cut.BLUE ONLY: Displays in solid blue.MONO: Only Y signal is used for black and white displays.2 Congure each mode setting.For RGB modeRGBMODE SELECTONG ON/OFFONB ON/OFFRGB/MONO SETTINGSONR ON/OFF• R ON/OFF, G ON/OFF, B ON/OFFOFF ONON: The red (for “R ON/OFF”), green (for “G ON/OFF”) or blue (for “B ON/OFF”) signal is on.OFF: The red (for “R ON/OFF”), green (for “G ON/OFF”) or blue (for “B ON/OFF”) signal is cut.For BLUE ONLY modeBLUE ONLYMODE SELECTRGB/MONO SETTINGSONBLUE ONLY• BLUE ONLYOFF ONON: The BLUE ONLY mode is enabled.OFF: The BLUE ONLY mode is disabledSETUP menuRGB/MONO SETTINGSTurn off R, G, B signals to adjust the image.The RGB/MONO SETTINGS function is also enabled/disabled with the FUNCTION button on the remote control (see page 63).SIGNALWAVEFORM MONITORSCREENSAVEREXTENDED LIFE SETTINGSINPUT LABELFUNCTION BUTTON SETTINGSON/OFF TIMER SETUPDAY/TIME SETUPNETWORK SETUP3D SETTINGSRGB/MONO SETTINGSMARKER SETTINGSRGBMODE SELECTONR ON/OFFONG ON/OFFONB ON/OFFRGB/MONO SETTINGS2 access1 selectPCFULLNANODRIFTR OFFNote:With MONO set, the color adjustment in the PICTURE menu is not available.When the setting of each item is enabled, the item being currently set to ‘Enable’ becomes disabled.When the function is enabled, selected mode is displayed.2 change1 select2 change1 selectFor MONO modeMONOMODE SELECTRGB/MONO SETTINGSONMONO• MONOOFF ONON: The MONO mode is enabled.OFF: The MONO mode is disabled