Panasonic TH-42PF50E Operating Instructions Manual

Also see for TH-42PF50E: Operating instructions

Contents

Panasonic TH-42PF50E Operating Instructions Manual Manual pdf 44 page image

44Function Button SettingsSet the functions that operates when is pressed.Function Button SettingsFunction Button 2Function Button GuideFunction Button 1 Multi-LiveScrolling barOnSelect “Function Button Settings” in “Setup” menu andpress button.• Function Button 1, Function Button 2The following functions are set to the FUNCTION button.INPUT (SLOT)* - INPUT (NETWORK)Simply press to select the input.* “INPUT (SLOT)” is displayed when an optional Terminal Board is installed.When a Terminal Board with dual input terminals is installed, “INPUT (SLOT A)” and “INPUT (SLOT B)” aredisplayed.• Function Button GuideThe function display setting for the FUNCTION button is congured.On: Press the FUNCTION button to display the function list of the button.Off: The function list is not displayed.ECO Mode settings / 3D Settings / Signal / On/Off Timer SetupScrolling barActivates the “Scrolling bar only” screensaver.After 15 minutes, the display enters standby mode.Note:Factory settings are as follows.FUNCTION1 button: Multi-LiveFUNCTION2 button: Scrolling barThe menu is displayed. (Example: ECO Mode settings)Pressing the FUNCTION button clears the menu.ECO Mode settingsOffDVI-D Power managementOffPower saveDisableNo signal power offOnStandby saveOffPC Power managementCustomECO ModeThe operation starts.Function1:Multi-Live 2:Scrolling barTo exit this mode, press any button.Network Setup“Network Setup” menu is displayed.Computer SearchThe list of connectable computers on the network isdisplayed.Multi-LiveSwitch to the Multi-Live mode when using the“Wireless Manager mobile edition 5.5”.AV MuteMutes the audio and video. To exit this mode, press any button.