Panasonic TH-42PF50E Operating Instructions Manual

Also see for TH-42PF50E: Operating instructions

Contents

Panasonic TH-42PF50E Operating Instructions Manual Manual pdf 11 page image

AUDIOOUTRLVIDEOOUTAUDIOOUTRL,Y, PB, PROUTP RP BY11ConnectionsVIDEO and COMPONENT / RGB IN connectionVideo equipment connectionSLOT: Terminal board (optionalaccessories) insert slot(see page 4)Note:The right side slot is forterminal board with 2-slot width.The terminal board with 1-slotwidth does not function wheninstalled in the right side slot.Terminals are on the bottom side of the Plasma Display.3D IR TRANSMITTER:Connect the 3D IRTRANSMITTER(optional accessory).SERIAL: Control thePlasma Display byconnecting to PC(see page 14)Notes:• Change the “Component/RGB-in select” setting in the “Setup”menu to “Component” (when Component signal connection) or“RGB” (when RGB signal connection). (see page 50)• Signals input to COMPONENT/RGB IN terminals correspond toSync on G or Sync on Y.RCA-BNCAdapter plugAUDIO L-R:Shared with VIDEO andCOMPONENT/RGB INRCA-BNCAdapter plugDVD PlayerVCRComputer RGB CamcorderNote:Additional equipment, cables and adapter plugsshown are not supplied with this set.DVI-D IN: DVI-D Input Terminal (see page 12)PC IN: PC Input TerminalConnect to video terminal of PC or equipment with Y,PB(CB) and PR(CR) output (see page 13).AV IN (HDMI): HDMI InputTerminal (see page 12)Connect to video equipmentsuch as VCR or DVD player.WIRELESSMODULE, LAN:Refer to “OperatingInstructions, NetworkOperations”.AV IN (VIDEO): Composite Video InputTerminal (see below)COMPONENT/RGB IN: Component/RGB VideoInput Terminal (see below)