Panasonic TH-42PF30U Operating Instructions Manual

Also see for TH-42PF30U: Service manual Operating instructions

Contents

Panasonic TH-42PF30U Operating Instructions Manual Manual pdf 48 page image

48SET UP for PORTRAITPress to select VIEWING AREA or LOCATION.Press to select each function.Notes:• For HD signal videos, the “VIEWING AREA” is set at “16:9”,and cannot be changed.HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.Press to exit from adjust mode.76Press to select AI-SYNCHRONIZATION.Press to select “OFF” , “ON”.Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting.The brightness depends oneach display’s setting.Equalize the brightness ofall the displays.OFF ONNotes:• If you set AI-SYNCHRONIZATION to ON, thefollowing menus will be unavailable and thesesettings will be xed to the initial values.PICTURE menu: COLOR, TINT, INPUTLEVEL (ADVANCEDSETTINGS)• This function cannot be adjusted duringinput from VIDEO terminal.AI-SYNCHRONIZATIONOFFPORTRAIT SETUPSEAM HIDES VIDEOOFF1OFFAI-SYNCHRONIZATIONVIEWING AREALOCATION16:9PORTRAIT SETUPOFFPORTRAIT SETUPSEAM HIDES VIDEOOFF1OFFAI-SYNCHRONIZATIONVIEWING AREALOCATION16:9PORTRAIT SETUP5VIEWING AREA: Set a mode of image division for PORTRAIT function.LOCATION: Set a location of image to be displayed for PORTRAIT function.VIEWING AREA / LOCATIONWhen PORTRAIT SETUP “ON”:Display the image of the selected LOCATION.When PORTRAIT SETUP is “OFF”:Represent an area of the selected LOCATION at a normalbrightness and darken the rest of it.LOCATION settingVIEWING AREA and LOCATIONThe mode of image division and the LOCATION by setting of VIEWING AREA is as follows.LOCATION 1 LOCATION 2 LOCATION 3LOCATION 1 LOCATION 2 LOCATION 3VIEWING AREA: 4:3Suitable to display FULL images. NORMAL(4:3) images extend transversely.Both right and left sides of the image arecut by 48 dots.VIEWING AREA: 16:94:3 images are displayed without changingaspect ratio.Although the images of each LOCATIONoverlap, you can adjust POS./SIZE to displaythe image normally. (see page 26)Undisplayed area (48 dots)