BLACK EXTENSIONGAMMAINPUT LEVELADVANCED SETTINGSNORMALNORMALIZEW/B LOW BW/B HIGH RW/B LOW RW/B LOW GW/B HIGH GW/B HIGH B002.2000000250005PICTURENORMALNORMALIZESTANDARDBRIGHTNESSSHARPNESSPICTURE MENUCOLORPICTURETINTADVANCED SETTINGSCOLOR TEMP NORMAL29PICTURE Adjustments1ADVANCED SETTINGSEnables ne picture adjustment at a professionallevel (see next page).Press to enter AdvancedSettings.While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)Press to display the PICTURE menu.Press to select the menu to adjust.Select the desired level by looking at the picture behind the menu.Select to adjust each item.Note:Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, inputand menu setting.2Press the left or right button to switch between modes.MONITORSTANDARDCINEMADYNAMICSTANDARDFor viewing in standard (evening lighting) environments.This menu selects the normal levels of BRIGHTNESSand PICTURE.DYNAMICFor viewing in brighter environments.This menu selects higher than normal levels ofBRIGHTNESS and PICTURE.CINEMAIdeal for movies.MONITORFor use when creating broadcast or movie content. Withthis picture, even if the overall average picture level (APL)changes, the brightness of areas with the same signallevel does not change.Notes:When “MONITOR” is selected in PICTURE MENU, thefollowing menu items cannot be set.PICTURE menu: PICTUREEXTENDED LIFE SETTINGS: PEAK LIMIT (see page 40)SET UP menu: POWER SAVE (see page 42)MULTI DISPLAY SETUP menu: AI-SYNCHRONIZATION (see page 46)PORTRAIT SETUP menu: AI-SYNCHRONIZATION (see page 48)If you would like to change the picture and color of theselected PICTURE menu to something else, adjust usingthe items in the PICTURE menu. (see next page)Press the left or right button to switch between modes.NORMAL COOL WARM