Panasonic TH-42LF30U Operating Instructions Manual

Also see for TH-42LF30U: Brochure Specification

Contents

Panasonic TH-42LF30U Operating Instructions Manual Manual pdf 43 page image

Options 1/3Initial inputOn screen display OnOffFailover input OffOffOff00Maximum VOL levelInitial VOL levelOffInput lockOffButton lockOffRemocon User levelOptionsEnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial ID---Serial Daisy ChainOffStudio W/B2/33/3OptionsOffOffClock DisplaySlot powerOffPower ON Screen DelayFunction button assign 1Power On Message (No activity power off)OnSignalFunction button assign 2 ScreensaverPower Switch Lock Off43Item AdjustmentsOn screen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial inputAdjusts the input signal when the unit is turned on.Off SLOT INPUT* VIDEO Component/RGB PC DVI HDMI1 HDMI2 Off* “SLOT INPUT” is displayed when an optional Terminal Board is installed.Notes:• Only the adjusted signal is displayed. (see page 17)• This menu is available only when “Input lock” is “Off”.Failover inputWhen there is no signal, the speci¿ed input signal is automatically switched to.Off SLOT INPUT* VIDEO Component/RGB PC DVI HDMI1 HDMI2 Off* “SLOT INPUT” is displayed when an optional Terminal Board is installed.Notes:• When other than “Off” is set, “Input lock” will be grayed out and cannot be set.• When “Input lock” is set to other than “Off”, this setting will be grayed out and cannot be set.Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menu ifyou adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 100 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menu ifyou adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.Options Adjustments124Press to display the SET UP menu.35Press to select “OSD LANGUAGE”.Press for more than 3 seconds.Press to select “Options”.Press to display the Options menu.Press to select your preferred menu.Press to adjust the menu.Press to exit from Options menu.OptionsShipping