Panasonic TH-42LF30U Operating Instructions Manual

Also see for TH-42LF30U: Brochure Specification

Contents

Panasonic TH-42LF30U Operating Instructions Manual Manual pdf 26 page image

26PICTURE AdjustmentsADVANCED SETTINGSNotes:• “COLOR” setting can be adjusted forVideo input signal.• You can change the level of each function(BACKLIGHT, PICTURE, BRIGHTNESS,COLOR, TINT, SHARPNESS) for eachPICTURE MENU.• The setting details for STANDARD,DYNAMIC and CINEMA respectivelyare memorized separately for each inputterminal.• The “TINT” setting can be adjusted forNTSC signal only during Video inputsignal.• “BACKLIGHT” can be adjusted when“ECO MODE” is set to “CUSTOM” and“POWER SAVE” to “OFF”. (see page33)On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any timeor the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)Item Effect AdjustmentsBACKLIGHT Darker Brighter Adjusts luminance of the back light.PICTURE Less More Adjusts the proper picture contrast.BRIGHTNESS Darker BrighterAdjusts for easier viewing of darkpictures such as night scenes andblack hair.COLOR Less More Adjusts color saturation.TINT Reddish Greenish Adjusts for natural Àesh tones.SHARPNESS Less More Adjusts picture sharpness.Item Effect DetailsINPUTLEVEL Less More Adjustment of parts which are extremely bright and hard to see.GAMMA Down Up S CURVE 2.0 2.2 2.6AGC OFF ON Increases the brightness of dark signal automatically.W/B HIGH R Less More Adjusts the white balance for light red areas.W/B HIGH G Less More Adjusts the white balance for light green areas.W/B HIGH B Less More Adjusts the white balance for light blue areas.W/B LOW R Less More Adjusts the white balance for dark red areas.W/B LOW G Less More Adjusts the white balance for dark green areas.W/B LOW B Less More Adjusts the white balance for dark blue areas.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.