Panasonic TH-42LF30U Operating Instructions Manual

Also see for TH-42LF30U: Brochure Specification

Contents

Panasonic TH-42LF30U Operating Instructions Manual Manual pdf 41 page image

( )NOISE REDUCTION OFF3 : 2 PULLDOWNSIGNALOFF[ Digital ]NOISE REDUCTION OFFHDMI RANGE AUTO41Note:NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.SET UP for Input SignalsNOISE REDUCTIONPress to select “NOISE REDUCTION”.Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”.AUTO: NOISE REDUCTION will be automaticallyselected from “MIN”, “MID” or “MAX”.SYNCSIGNAL [ RGB ]3 : 2 PULLDOWNXGA MODEAUTOOFF1024 ×768This function operates only during input from PC IN terminal.SYNCHDMI RANGECon¿rm that the input is set to RGB input (this setting is valid only for RGB input signal).AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.However, the synchronized signal that is input ¿rst is selected.ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.Note:Accepts only RGB signals from COMPONENT/RGB IN terminal with “SYNC ON G”.Switches the dynamic range according to the input signal from HDMI terminal.VIDEO(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD playerFULL(0-255): If the input signal is full range, Example: HDMI terminal output for personal computerAUTO: Switches the dynamic range automatically between “VIDEO(16-235)” and “FULL(0-255)” according to the input signal.Note:This function can be set only for HDMI signal input.Press to select the “SYNC”.Press to adjust.Press to select “HDMI RANGE”.Press to select “VIDEO(16-235)”, “FULL(0-255)”, “AUTO”.