Panasonic TH-42LF30ER Operating Instructions Manual

Also see for TH-42LF30ER: Service manual Operating instructions

Contents

Panasonic TH-42LF30ER Operating Instructions Manual Manual pdf 40 page image

Noise reduction OffSignal [ Digital ]HDMI Range AutoNoise reductionCinema realityOffOff40Press to select “Noise reduction”.Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.Auto: Noise reduction will be automatically selected from “Min”,“Mid” or “Max”.Noise reductionSetup for Input SignalsNote:Noise reduction can be adjusted while a Video or Component signal is being applied.SyncSignal [ RGB ]Cinema realityXGA ModeAutoOff1024 ×768This function operates only during input from PC IN terminal.Con¿rm that the input is set to RGB input (this setting is valid only for RGB input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.However, the synchronized signal that is input ¿rst is selected.on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.Note:Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”SyncPress to select the “Sync”.Press to adjust.Switches the dynamic range according to the input signal from HDMI terminal.Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD playerFull(0-255): If the input signal is full range, Example: HDMI terminal output for personal computerAuto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.Note:This function can be set only for HDMI signal input.HDMI RangePress to select “HDMI Range”.Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.