Panasonic TH-42LF30ER Operating Instructions Manual

Also see for TH-42LF30ER: Service manual Operating instructions

Contents

Panasonic TH-42LF30ER Operating Instructions Manual Manual pdf 26 page image

000SoundNormalNormaliseNormalOffTrebleSound ModeBalanceBassSurround1/226Sound Adjustment1 Press to display the Sound menu.Press to select the menu to adjust.Select the desired level by listening to the sound.Note: Bass, Treble and Surround settings are memorized separately for each Sound Mode.2 Select to adjust each item.While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or theACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)Item DetailsSound ModeNormal: Emits the original sound.Dynamic: Accentuates sharp sound.Clear: Attenuates human voice.Bass Adjusts low pitch sounds.Treble Adjusts high pitch sounds.Balance Adjusts left and right volumes.Surround Select On or Off.3 Press to exit from adjust mode.SDI Sound OutputThis menu is available only when selecting a slot that the following terminal board is installed:HD-SDI Terminal Board with audio (TY-FB10HD)2/2Sound OutRight Channel Channel 1Left Channel Channel 1OffLevel Meter OffSDI Sound Output Item DetailsLeft Channel Channel 1 to Channel 16Selects left audio channel.Right Channel Channel 1 to Channel 16Selects right audio channel.Sound OutOn OffOn: Enables audio output.Off: Disables audio output.Level MeterOff 1-8ch 9-16chSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4 channelseach on both right and left sides of the display.Off: Hides the audio level meter.1-8ch: Displays the audio level meter (1-8ch)9-16ch : Displays the audio level meter (9-16ch)