Panasonic TH-42LF30ER Operating Instructions Manual

Also see for TH-42LF30ER: Service manual Operating instructions

Contents

Panasonic TH-42LF30ER Operating Instructions Manual Manual pdf 24 page image

10070505050PictureNormalNormaliseNormalBrightnessPicture ModeColourContrastBacklightTintAdvanced settingsWhite balance NormalSharpness 50AGCGammaInput levelAdvanced settingsNormalNormaliseW/B Low BW/B High RW/B Low RW/B Low GW/B High GW/B High B02.2505050505050OffPress to enterAdvanced settings .24Press “ ” or “ ” button to switch between modes.NormalFor viewing in standard (evening lighting)environments.This menu selects the normal levels of Brightnessand Contrast.DynamicFor viewing in brighter environments.This menu selects higher than normal levels ofBrightness and Contrast.CinemaIdeal for movies.Note:If you would like to change the picture and colourof the selected Picture menu to something else,adjust using the items in the Picture menu. (seenext page)12Press to display the Picture menu.Press to select the menu to adjust.Select the desired level by looking at the picture behind the menu.Select to adjust each item.Press “ ” or “ ” button to switch between modes.While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or theACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)NormalCinemaDynamicNote:Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, inputand menu setting.Picture AdjustmentsNormal Warm CoolAdvanced settingsEnables ¿ne picture adjustment at a professionallevel (see next page).