Panasonic TH-103PB1U Operating Instructions Manual

Also see for TH-103PB1E: Operating instructions Service manual

Contents

Panasonic TH-103PB1U Operating Instructions Manual Manual pdf 42 page image

42Function Button SettingsSet the functions that operates when is pressed.Function Button SettingsFunction Button 2Function Button GuideFunction Button 1 Touch-PenScrolling barOnSelect “Function Button Settings” in “Setup” menu andpress button.• Function Button 1, Function Button 2The following functions are set to the FUNCTION button.INPUT (SLOT)* - INPUT (NETWORK)Simply press to select the input.* “INPUT (SLOT)” is displayed when an optional Terminal Board is installed.When a Terminal Board with dual input terminals is installed, “INPUT (SLOT A)” and “INPUT (SLOT B)” aredisplayed.• Function Button GuideThe function display setting for the FUNCTION button is congured.On: Press the FUNCTION button to display the function list of the button.Off: The function list is not displayed.Touch-PenPress and turn Touch Pen mode On/Off.ECO Mode settings / Signal / On/Off Timer SetupScrolling barActivates the “Scrolling bar only” screensaver.After 15 minutes, the display enters standby mode.Note:Factory settings are as follows.FUNCTION1 button: Touch-PenFUNCTION2 button: Scrolling barThe menu is displayed. (Example: ECO Mode settings)Pressing the FUNCTION button clears the menu.ECO Mode settingsOffDVI-D Power managementOffPower saveDisableNo signal power offOnStandby saveOffPC Power managementCustomECO ModeTouch-Pen OnThe operation starts.Function1:Touch-Pen 2:Scrolling barTo exit this mode, press button.Network Setup“Network Setup” menu is displayed.Computer SearchThe list of connectable computers on the network is displayed.Note:For the network function, refer to “Operating Instructions, Network Operations” and the instruction manual of “WirelessManager” in use.Multi-LiveSwitch to the Multi-Live mode when using the“Wireless Manager”.AV MuteMutes the audio and video. To exit this mode, press any button.