Express settingsCustom settingsResetExtended life settings30Picture ModeContrastExtended life settingsDynamicSide panelNANODRIFT SaverLock settingsPeak limitHighHigh midunlockApply to current inputApply to all inputsOffRecommended settings37Extended life settingsSide panelDo not display a picture in 4:3 mode for an extended period,as this can cause an image retention to remain on the sidepanels on either side of the display eld.To reduce the risk of such an image retention, illuminatethe side panels.This function may be applicable to the non-picture area.Off: Darken both ends.Low: Make it dark gray.Mid: Make it gray.High: Make it light gray.Notes:• To reduce the occurrence of image retention, set the Side panel to High.• The side panel may ash (alternate black/white) depending on the picture being shown on the screen. Using Cinemamode will reduce such ashing.side panel4:3 ScreenDisplayimageretentionReduces screen image retentionThe following settings are setup to reduce image retention:Select “Extended life settings” in “Setup” menu and press button.Image Retention Reduction Menu“Extended life settings” enables you to set the following 5 menus (Image Retention Reduction Menu) as recommendedvalues or set them individually.Picture ModeContrast“Picture Mode” and “Contrast” are same as “Picture” menu items (see page 26). The settings of this menu will bereected to the “Picture” menu.Note:In “Extended life settings”, “Picture Mode” and “Contrast” of the input with Touch Pen mode On cannot be changed.You can set “Contrast” in the “Picture” menu.Set to the recommended valueSet individuallyReset to the factory settingsImage Retention ReductionMenu