Panasonic TH-103PB1U Operating Instructions Manual

Also see for TH-103PB1E: Operating instructions Service manual

Contents

Panasonic TH-103PB1U Operating Instructions Manual Manual pdf 35 page image

ScreensaverStartFunction Scrolling bar onlyMode OffTime 99:9935Screensaver (For preventing image retention)Do not display a still picture, especially in 4:3 mode, for any length of time.If the display must remain on, a Screensaver should be used.Function selection213Select “Screensaver” in “Setup” menu and press button.Press to select Function.Press to select the desired function.Scrolling bar onlyOverlay scrolling barNegative imageWhite screenMode selectionStart setting4 When the Mode is set to On, press to select Start.Press to start Screensaver.The menu screen will disappear and the Screensaver will be activated. To stop theScreensaver under On, press the R button or any buttons on the main unit.Note: When the display is turned off, the Scrensaver will be deactivated.Press to select Mode.Press to select eachmode items.OffInterval : Operates when Periodic Time and OperatingTime are setup and those times arrive.Time Designation : Operates when Start Time and Finish Timeare setup and those times arrive.Standby after SCR Saver : Operates while Screensaver duration, anddisplay enters standby mode.On : Operates when Start is selected and theACTION ( ) button is pressed.Negative image : Negative image will be displayed on the screen.Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scrollon it.White screen : The whole screen will be white.