Panasonic TC-29P250H Operating Instructions Manual

Also see for TC-29P250H: Operating instructions Operating instructions

Panasonic TC-29P250H Operating Instructions Manual Manual pdf 28 page image

28Aspect ControlsPICTURESOUNDSET UPTV/TEXT F.P. INDEXSTILLHOLD100Hz/PROGRESURROUNDASPECT1 2 34 5 67 8 90MULTIPIPCH SEARCHTV/AV/RGBThe on screen selector keys (corresponding to the four coloured buttons on the remote control) that appear for someAspect functions clear after a few seconds. If you want to select an operation when the keys are not shown, press ASPECTASPECTonce more and the keys will reappear.Press ASPECTto move through the aspect options:4:3S-ZOOMAUTO16:9Notes:• Simply press ASPECTASPECTto display mode information in the top left of the screen.• 16:9 picture has been used to illustrate all of the aspect modes described in this section.• During AV mode, AUTO is added to the options displayed above.ModeAUTOExplanationWhen a wide screen signal from the special video isdetected by S1-Video Terminal of the unit, the Aspectratio auto-matically set to 16:9 screen.There is a wide variety of software available with aspectratios from 1.78:1 (16:9) to 2.35:1 (cinema vision).Picture4:3 will display a 4:3 picture at its standard 4:3 sizewithout any stretching.344:34 : 3S-ZOOM S-Zoom displays the picture at a greater magnificationthan Zoom mode does.Press the red or green buttons to move the picturehorizontally. Press the yellow or blue buttons to movethe picture vertically.16 : 9 1616:9916:9 will display the picture at its maximum size butwith slight stretching. Black stripes will be visible downthe top and bottom of the picture.34H-POS– H-POS+ V-POS– V-POS+S-ZOOMBlue button has beenp r e s s e d t o m o v epicture upwards34H-POS– H-POS+ V-POS– V-POS+S-ZOOMZoom91616:9 Signal344:3 Signal