Panasonic TC-29P250H Operating Instructions Manual

Also see for TC-29P250H: Operating instructions Operating instructions

Panasonic TC-29P250H Operating Instructions Manual Manual pdf 27 page image

27Tuning Menu1. If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour System Selection”operation on page 25.2. After the Manual tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each ProgrammeNumbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.3. When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated in theinstruction manual of VCR and to set the designated channel to programme No.“0”. In that case, perform manual tune aftersetting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the designatedchannel to several programme Numbers.Helpful HintBefore Auto tune, set the “SYSTEM SELECTION” and “CHANNEL SELECT” mode.Manual tune1 Press F (Front panel) until Tuning mode is reached.2 Press –/ or +/ to access Tuning mode.3 Press TV/AV to move between Change programme, Search and Change TVsystem.4 Press –/ or +/ to change programme position or start search.When the desired station is found, press STR to store.The programme position will flash.Repeat above procedure to tune additional programme positions.Press F at any time to exit the Tuning menu.100Hz PROGRESSIVE PIP TEXT TX-34P250TSTR F –/ +/ TV/AVCH 25.5 MHz2MANUAL TUNE (FRONT PANEL)– / + : SEARCHTV/AV : MOVE CURSORSTR : TO STOREF : TO EXITSTR F TV/AV+/–/1 PressPICTURESOUNDSET UPSET UPTV/AVSTRHELP.2 Move to chosen menu option by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.3 Access Tuning menu by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.4 Move to chosen menu option by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.5 Access Manual Tune by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.6 Select the programme position to be tuned by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.7 Press repeatedly until required station is found by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.When the desired station is found, pressPICTURESOUNDSET UPTV/AVSTRHELPto store.The program position will flash.PressPICTURESOUNDSET UPTV/ATV/A VSTRHELPat any time to go back to watching TV.E X I TRETURN TV/AVSEARCH – /+PROGRAMME – /+BUTTON STORE’STR’MANUAL TUNECH 22Manual tune (via front panel)It is also possible to use the control panel buttons on the front of the TV to tune individual programme positionsPICTURESOUNDSET UPTV/AV