Panasonic TC-29P250H Operating Instructions Manual

Also see for TC-29P250H: Operating instructions Operating instructions

Panasonic TC-29P250H Operating Instructions Manual Manual pdf 11 page image

11How to connect the DVD Input TerminalsAudioOUT P B YP RDVD(Y•P B•P R) OUTLRDVD PlayerAV1IN AV2IN AV4INMONITOROUTS-VIDEOVIDEOVIDEOAUDIOLRAUDIOLRMONO MONO MONODVD[Y-PB -PR ]DVD[Y-PB -PR ]YPBYPBPR PRAUDIOLRMONODVD[Y-PB -PR ]YPBPRVIDEOAUDIORecording Equipment(VHS VCR)Audio VideoR LIN INMONITOROUTS-VIDEOVIDEOAUDIOLRAV1IN AV2IN AV4INMONITOROUTS-VIDEOVIDEOVIDEOAUDIOLRAUDIOLRMONO MONO MONODVD[Y-PB -PR ]DVD[Y-PB -PR ]YPBYPBPR PRHow to connect the AV Monitor Output Terminals to other equipmentThe “Monitor Out” Terminals output the same signals as main picture on the TV screen and sound from the speaker atthat time, e.g. TV programmes or signals from AV1, AV2, AV3 or AV4 input.ConnectionsNotes:• The AV4 audio signal is common for both AV4 and DVD input signal terminals.• The DVD signal input terminal takes priority over the AV4 video signal input terminal.• Similar connection are available at the COMPONENT VIDEO input 2 terminal.Notes:• Never connect the same video recorder with both the VIDEO IN and MONITOR OUT terminals on this TV set, as thiscould cause incorrect operation.• The monitor output emits the main picture normal video and audio signals.• Teletext display on screen will not be output at the MONITOR OUT terminals.• Even if the television is in picture-in-picture condition, MONITOR OUT terminals output the same signals as mainpicture on the screen and sound from speakers. Sub picture including strobe, still, channel search, etc. will not be outputat the MONITOR OUT terminals.• The RGB mode signal, and DVD signal (Y, PB, PR ) are not output at the MONITOR out terminals.