Panasonic TC-29P250H Operating Instructions Manual

Also see for TC-29P250H: Operating instructions Operating instructions

Panasonic TC-29P250H Operating Instructions Manual Manual pdf 19 page image

19Picture MenuHelpful Hint ( Normalization)COOLWARMSTANDARDNote:• We recommend that you set Scan mode to Progressive when viewing a PAL 60or NTSC transmission. When viewing a PAL transmission (other than PAL 60)with Scan mode set to Progressive, the screen will flicker, this is not a fault.AUTOAISCAN MODEPICTUREP-NRONWEAKAutomatically reduces unwanted picture noise.PressPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELPto switch between modesWEAKSTRONGOFFAUTOAIlows you to set the overall colour toneof the picture.PressPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELPto switch between modesCONTRASTBRIGHTNESSCOLOURSHARPNESSNTSC-TINTC. TEMPMENU SOFTSTANDARDPICTURETV/TEXT F.P. INDEXSTILLHOLD100Hz/PROGRESURROUND1 2 34 5 6CH SEARCHBy pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed tothe Normal Mode.Normalization will not occur if the menu is not displayed when the “N” Button is pressed.The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.C. TEMP(Colour Temperature)P-NR(Picture NoiseReduction)AISCAN MODEP-NR WEAKTC-29P250H, TC-34P250H switching is alsopossible using D.PNR.PNRon the remote control.Automatically analyses the incomingpicture and processes it to give improvedcontrast and optimum depth of field.AUTOAISCAN MODEPICTUREP-NR WEAKONAI ONTC-29P250H, TC-34P250H switching is alsopossible using P.AIon the remote control.Swtiching is also possible using 100Hz/100Hz/PRPROGREOGRE on the remote control.AISCAN MODEPICTUREP-NR WEAKONAUTOLets you choose the screen refresh method:PressPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELPto switch between modesPROGRESSIVE100 Hz MODEAUTOMODE FunctionAUTO100 Hz MODEPROGRESSIVEThe TV software will select the best mode for the signal being viewed.100Hz will give a steady picture for most signal transmission.Recommended when receiving NTSC signals.