Panasonic TC-29P250H Operating Instructions Manual

Also see for TC-29P250H: Operating instructions Operating instructions

Panasonic TC-29P250H Operating Instructions Manual Manual pdf 26 page image

261. If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the “Colour SystemSelection” operation on page 25.2. After the Automatic tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each ProgrammeNumber. If some Programme Numbers are unused, it is possible to skip such Programme Numbers. Please refer to the Programme.Helpful HintPICTURESOUNDSET UPTV/TEXT F.P. INDEXSTILLHOLD100Hz/PROGRE CH SEARCHTV/AV1 PressPICTURESOUNDSET UPSET UPTV/AVSTRHELP.2 Move to chosen menu option by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.3 Access Tuning menu by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.4 Move to chosen menu option by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.5 Access AUTO TUNE by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.Notes:• If you proceed with the next step all tuning data will be erased (all stationsand their programme positions stored in your TV's memory will be wiped outso the new settings can be stored).• If you exit the procedure after this point and before AUTO TUNE iscomplete, no station information will be stored. Restart and completethe AUTO TUNE procedure so that the TV is re-tuned.6 Start AUTO TUNE by usingPICTURESOUNDSET UPTV/AVSTRHELPorPICTURESOUNDSET UPTV/AVSTRHELP.Once this operation is completed the TV will display the program now storedon programme position 1.PressPICTURESOUNDSET UPTV/ATV/A VSTRHELPat any time to go back to watching TV (please read the Notein the above procedure).CH 2929AUTO SETUP IN PROGRESSSEARCHING :SETUP : RETURN TO TUNING MENUTV/AV : TO EXITSTORED CH29Auto tune (via front panel)It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions1 Press F (Front panel) until Tuning mode is reached.2 Press –/ or +/ to access Tuning mode.3 Press F (Front panel) to access Auto tune.4 Press –/ or +/ to start search.When the desired station is found, press STR to store.The programme position will flash.Repeat above procedure to tune additional programme positions.Press F at any time to exit the Tuning menu.100Hz PROGRESSIVE PIP TEXT TX-34P250TSTR F –/ +/ TV/AVTuning MenuBefore Auto tune, set the “SYSTEM SELECTION” and “CHANNEL SELECT” mode.Auto tune